blinkx

  • Bill Amsdill’s 10 Second Street Strip 73 Oldsmobile Cutlass

  • StreetFire
    • Browse
  • Expand ToolbarCollapse ToolbarClose Toolbar

Attached   Axle   Beam   Bottom   Brian   Cam   Cast   Cnc   Combo   Components   Consists   Conventional   Converted   Converter   Crank   Dual   Eagle   Edelbrock   Esp   Gear   Girdle   Holley   Intake   Lift   Lightweight   Mondello   Oldsmobile Cutlass   Pac   Pan   Pistons   Plugged   Ported   Probe   Retainers   Rings   Rockers   Rods   Roller   Rpms   Scorpion   Scott Brown   Sealing   Stainless   Steel   Strip   Stroke   Stud   Tci   Tool   Valves   Victor   Warren   

Bill Amsdill’s 10 Second Street Strip 73 Oldsmobile Cutlass

Bill Amsdill’s 10 Second Street Strip 73 Oldsmobile Cutlass

This 1973 Olds Cutlass is simply beautiful. Owned by Bill Amsdill of Warren Gear & Axle. Put together with the time and talents of Scott Brown of Competition Components, Brian and Ed of T J & Sons as well as Warren Gear & Axle. His combo consists of a stock block with the Mondello bottom end girdle and matching oil pan. The crank is an Eagle 4.250 stroke cast unit, with their ESP H beam rods attached. The pistons are Probe pieces, with Total Seal conventional rings sealing them up. The heads are Edelbrock Performer RPMs that have been CNC Ported and had 2.19/1.68 Stainless valves in them. The valve springs are dual from PAC, and with lightweight tool steel retainers, Scorpion Roller Rockers, and a Jomar Stud Girdle. The Cam is a street roller from Scott Brown at Competition Components with 268 @ .050 and .700 lift. The Intake is a port matched Edelbrock Victor, with a Holley Dominator converted to run on E85. A TCI Converter is plugged into the TH400, connected to a 4.10 gear. The car is raced in the same

StreetFire | June 25, 2012Watch more videos from StreetFire

Tags:. .edelbrock. .cast. .mondello. .strip. .brian

Collapse Toolbar